When connected into a DX cluster you
will receive WWV spots in real time. You
can also query for past WWV spot information.
The hour of each WWV spot is aligned with the publication times of: 00, 03,
06, 09, 12, 15, 18, or 21 in GMT. The
scales used in WWV forecasts can be found at http://www.swpc.noaa.gov/Data/info/WWVdoc.html.
The SHow WWv command
can be used to output the latest WWV spots.
The default number of spots displayed can be set with the Set/WWV/Count
command.
Example:
show wwv
The Show/Wwv/nn command
allows you to specify the number of WWV spots displayed.
Examples:
show wwv 10
show wwv 30
The Show/WWV DTS command can be used to display announcement spots
filtered by date-time stamp.
Examples:
show/wwv dts>2011-12-11 03:04:55
show/wwv dts>2011-12-17 03:04:55 and dts<2011-12-18 03:04:55
The SHow WWv Options command is used
to display the configuration of WWV spot options. The following options are displayed:
WWV/Count – The default number of displayed
WWV spots.
WWV/Output
– The output mode for WWV spots. Valid modes are: Off, On. Normally set to On.
Examples:
show/wwv/options
The following options can be set
using the SET/WWV command:
Set/WWV/Count – Set the default number of
displayed announce spots
Set/ WWV /Default – Sets WWV options back to their default factory
settings.
Set/WWV/Output – Sets the output mode for announce
spots. Valid modes are: Off, On.
The SEt WWv Count command
is used to set the default number of spots displayed for real-time and past WWV
spots.
Examples:
set/wwv/count 10
The
SEt WWv Default command
is used to set the WWV options back to the default settings. Default factory settings are:
Count – 10
Output – On
Examples:
set wwv default
The SEt WWv Output command
is used to set output mode for real-time WWV spots. Valid modes are: Off, On. Settings options are defined as:
Off
– Turn off
real-time WWV spots.
On – Display the normal user spot
format. Default setting.
Examples:
set wwv output on
set/wwv/output off